Firstly install FFMPEG on your host computer.
In order to view live video stream from Zenmuse camera run on the host:
ffplay tcp://192.168.0.17:9123 -flags2 showall -fflags nobuffer
Video stream specifications:
- Format: H.264 (without key frames)
- Resolution: up to 1280x720 (depends on Zenmuse model)
- Protocol: TCP
- Port: 9123
Before processing video you are likely to decode the stream. You may use GStreamer for that purposes:
gst-launch-1.0 tcpclientsrc host=192.168.0.17 port=9123 ! h264parse ! \ avdec_h264 ! xvimagesink
You a free to use any processing software like OpenCV etc. both on the host and board.